Cosco kansai paint launch first wind tower drum fluorocarbon coatings-Hummer wind turbine

Home > > Wind turbine news > > Cosco kansai paint launch first wind tower drum fluorocarbon coatings

Cosco kansai paint launch first wind tower drum fluorocarbon coatings

Cosco kansai paint launch first wind tower drum fluorocarbon coatings - than the existing system of polyurethane coating, coating performance of dramatically boosted, using life tower drum, provide for 20 years long protective security.

Cosco kansai paint chemical Co., LTD. (hereinafter referred to as "cosco kansai"), as the leading enterprise industrial anticorrosion coating, first are rolled with wind tower drum fluorocarbon coatings, which can effectively improve the reliability of wind tower drum, prolong service life, provide for 20 years long protective security.

The current wind power coatings are used standard polyurethane coating Europe, mainly because in wind power generators industry development in Europe at the beginning of the development of super-long weatherability topcoat still not mature, so choose the most mature technical, relative weathering good pu coatings as protection. While general pu coatings for security restrictions by life, fan 20-year service life, meantime must carry on the multiple recoat and maintenance, greatly increased maintenance cost and potential safety problems, and wind power equipment on-site to coating extremely difficult, loading and unloading, transport and high cost of maintenance wind turbines manufacturers downtime, far above the first coating paint itself cost price. So urgently need a high-performance long-term protection coatings, and in conformity with the anticorrosion coating fan equipment whole-life design become a crucial factor.

Fluorocarbon coating for its super weathering resistance and contamination sex is known as "the king of coating, paint film is outdoor wastage in aging lowest coatings, theoretically 20 microns film thickness will meet the 40 years of anticorrosive requirements. Cosco small wind turbines kansai this successfully developed with the wind tower drum, the paint fluorocarbon dope in similar polyurethane products wastage of insufficient 1/4, in fan normal life period, don¡¯t need maintenance or only a maintenance, can guarantee 20 years of anticorrosive fixed number of year, and by reducing maintenance frequency can be sharply reduce coating the overall cost. Because windmill generator its design film thickness, less than traditional polyurethane coating film thickness in coating process, still can reduce VOC gas emissions, and then save social resources and energy, a greater degree of reduce environmental pollution.

The product consists of four fluorine resin, aliphatic much isocyanate and high resistance against weathering pigment etc, with excellent weather-resistance can resistance and pulverization, the gloss, and paint film is tough and strong, has the extremely resistant to abrasion performance. Its mechanism is will face paint with fluorocarbon coating other supporting reliable coating cover formed together, make full use of fluorocarbon coatings excellent weather-resistance, corrosion resistance and excellent physical and mechanical properties of substrate, provide the protective shield effect, extend the useful lifespan of coating.

At present, the very high performance fluorocarbon coatings already fully won the industrial anticorrosion market acceptance. If the future into wind anticorrosive market, it can greatly enhance the wind-power equipment syndrome and corrosion resistance performance of the equipment, prolong the protection period, reduce maintenance costs, relative to current wind power facilities by use of polyurethane system fluorine carbon system coating, coating will become to upgrade the product, to promote the country¡¯s wind power coating the update will play a very active role.